Concrete Testing Lab Equipments

• Equipment Type
• Spring Type Concrete Penetrometer

• Accuracy
• 0.05 MPa

• Application
• Determining setting time/strength of cement and concrete

• Automation Grade
• Manual

• Capacity
• 60 kg/cm2 (850 psi)

• Color
• Blue

• Control Mode
• Hand Held

• Display Type
• Analog (Scale Reading)

• Features
• Lightweight, Portable, Durable

• Hardness
• Steel Penetration Needle

• Humidity
• 0-90% RH (Operating)

• Interface Type
• Mechanical

• Machine Weight
• 1 Kilograms (kg)

• Max Height
• 210 mm (approx.)

• Measuring Range
• 0-2.5 MPa (0-850 psi)

• Mounting Type
• Handheld

• Number of Specimens
• Single Specimen per Test

• Power Supply
• Electric

• Resolution
• 0.01 MPa

• Response Time
• Instantaneous

• Specimen Size
• Standard concrete mix or mortar specimen

• Temperature
• 0C to 50C Operating

• Test Range
• 0 to 2.5 MPa

• Test Speed
• Manual Operation

• Test Stroke
• Continuous

• Usage
• QA Lab

• Equipment Type
• Concrete Flow Table Test Set

• Accuracy
• 1 mm

• Application
• Measurement of workability/fluidity of concrete

• Automation Grade
• Manual

• Capacity
• Standard table and mold capacity

• Control Mode
• Manual

• Display Type
• Manual Visual Scale

• Features
• Corrosion-resistant finish, robust construction, precise calibration, detachable conical mold

• Hardness
• High strength, heavy duty base and table

• Humidity
• Ambient conditions

• Machine Weight
• Approx. 30 kg

• Max Height
• 76 mm (as per mold height)

• Measuring Range
• Flow diameter up to table size

• Mounting Type
• Floor mounted

• Number of Specimens
• Single specimen per test

• Power Supply
• Not Required (Manual)

• Resolution
• 1 mm

• Response Time
• Immediate upon operation

• Specimen Size
• Conical mold 120 mm (top dia.) 200 mm (base dia.) 76 mm (height)

• Temperature
• Ambient (5C to 40C)

• Test Range
• Flow Percent of Concrete 0-100%

• Test Speed
• Manual operation (single drop in standard method)

• Test Stroke
• 40 mm up and down movement as per standard

• Test Width
• 700 mm (Table Diameter)

• Usage
• Construction lab, site testing

• Equipment Type
• Concrete Cylinder Mould

• Accuracy
• Conforms to IS:10086, ASTM C31, ASTM C470, and equivalent standards

• Application
• Creating cylindrical concrete test specimens for compressive strength and other tests

• Automation Grade
• Manual

• Capacity
• One cylinder mould per unit

• Control Mode
• Manual

• Features
• Leak-proof, Rigid Construction, Durable, Reusable, Machined finishing, Corrosion Resistant

• Hardness
• Typically 40-55 HRC (Metal Surface)

• Machine Weight
• 1.8 kg - 6.5 kg

• Material
• Steel

• Max Height
• 300 mm (depending on model/spec)

• Mounting Type
• Free-standing / Table Top

• Number of Specimens
• Single (per mould)

• Power Supply
• Not Required (Manual Use)

• Specimen Size
• 150 mm diameter x 300 mm height / 100 mm diameter x 200 mm height (as per standards)

• Temperature
• -10C to 60C (Suitable for Various Laboratory Conditions)

• Usage
• Concrete Test

• Color
• Blue

• Machine Weight
• 20 Kilograms (kg)

• Number of Specimens
• 7

• Power Supply
• Electric

• Specimen Size
• 200 Millimeter (mm)

• Usage
• QA Lab

• Equipment Type
• Compression Testing Machine

• Accuracy
• Class 1

• Automation Grade
• Manual

• Capacity
• 1000 kN

• Control Mode
• Manual

• Display Type
• Analog

• Features
• Portable, robust construction

• Machine Weight
• Approx. 160 kg

• Max Height
• Approx. 320 mm

• Measuring Range
• 0-1000 kN

• Mounting Type
• Floor mounted

• Operating Voltage
• 230 V

• Specimen Size
• Cube: 150 mm, Cylinder: 150 mm dia

• Test Range
• Up to 1000 kN

• Test Speed
• Hand operated

• Test Stroke
• Manual piston travel

• Usage
• Material Strength Testing

• Accuracy
• Class 2

• Automation Grade
• Automatic

• Capacity
• 1000 kN

• Control Mode
• Semi automatic

• Power Supply
• 230 V 50 Hz

• Application
• Cement Test

• Mounting Type
• Floor Mounted

• Power Supply
• 415 V Three

• Application
• Cement Testing

• Capacity
• 250 ml

• Features
• Thermal Shock Resistant

• Measuring Range
• 0 to 1 ml

• Mounting Type
• Bench-top

• Usage
• Le Chatelier Test

• Capacity
• 500 ml

• Power Supply
• 60 Hz, 230 V AC, Single Phase

• Temperature
• RT-100DegreeC

• Application
• Concrete Compaction

• Capacity
• 300 kg

• Features
• Variable Speed

• Max Height
• 700 mm

• Mounting Type
• Mild Steel Table

• Application
• Mining, Construction, Laboratory

• Automation Grade
• Semi Automatic

• Capacity
• 50 kg

• Control Mode
• Manual switch

• Frequency
• 60 Hz

• Machine Weight
• Approx. 45 kg

• Max Height
• 45 cm

• Mounting Type
• Floor mounted

• Number of Specimens
• 3 at a time

• Port Size
• Standard socket

• Power Supply
• 2 kW Electric

• Specimen Size
• 70.6 mm cubes

• Test Speed
• 2900 rpm

• Usage
• Mortar cube compaction

• Application
• Lab

• Display Type
• LCD

• Measuring Range
• 10-70 N/mm2

• Application
• Cement Testing

• Capacity
• 3 Cube

• Specimen Size
• 150 mm

• Usage
• Mortar Test

• Equipment Type
• Slump Test Apparatus

• Application
• Fresh concrete workability

• Number of Specimens
• One at a time

• Specimen Size
• 100x70 mm (cone)

• Usage
• Site, Lab

• Capacity
• 100 kN

• Control Mode
• Analog

• Power Supply
• 230 V AC

• Number of Specimens
• Single Gang

• Specimen Size
• 150x150x700 mm

• Usage
• Concrete Testing

• Equipment Type
• Vicat Needle Apparatus

• Application
• Cement Testing

• Equipment Type
• Standard Penetration Test (SPT)

• Accuracy
• 2%

• Display Type
• Digital Display

• Frequency
• 60 Hz

• Equipment Type
• Hand Operated Flow Table

• Power Supply
• 230 V AC

• Accuracy
• IS standard tolerance

• Application
• Workability testing of concrete

• Capacity
• One Cone per Test

• Control Mode
• Manual

• Display Type
• Graduated scale or stopwatch

• Features
• Electrical Vibrator

• Max Height
• 300 mm

• Measuring Range
• Low to high slump

• Mounting Type
• Tabletop

• Number of Specimens
• Single per operation

• Power Supply
• 230 V AC

• Resolution
• 1 mm

• Response Time
• Typically <1 min

• Specimen Size
• 300 mm Cone Height

• Test Stroke
• Rotating and vibrating motion

• Test Width
• 300 mm (Table Diameter)

• Usage
• Site, Lab

• Equipment Type
• Compaction Factor Apparatus

• Accuracy
• Compliant to IS 1199

• Application
• Workability test of concrete

• Automation Grade
• Manual

• Capacity
• 15 L (Cylinder Volume)

• Control Mode
• Manual

• Features
• Painted mild steel frame

• Measuring Range
• Varies as per concrete mix

• Mounting Type
• Tabletop

• Specimen Size
• Standard concrete mix

• Test Range
• Workability of concrete

• Usage
• Laboratory and field

• Application
• Concrete

• Automation Grade
• Semi Automatic

• Capacity
• 40 Litres

• Control Mode
• Manual

• Frequency
• 50 Hz

• Max Height
• Approx. 1.1 m

• Mounting Type
• Floor Mounted

• Number of Specimens
• Single Batch

• Operating Voltage
• 220-240V

• Port Size
• Standard

• Power Supply
• Electric

• Test Range
• Standard Concrete Mix

• Test Speed
• 30 rpm

• Usage
• Construction Mixing

• Equipment Type
• Core Cutting Machine

• Accuracy
• 1 mm

• Application
• Cutting concrete, rock, asphalt cores

• Automation Grade
• Semi-Automatic / Manual

• Capacity
• 2 HP motor

• Control Mode
• Manual / Automatic

• Display Type
• Analog / Digital (optional)

• Features
• Heavy-duty body, Adjustable feed, Water cooling attachment

• Frequency
• 50 Hz

• Hardness
• Suitable for up to 70 HRC materials

• Humidity
• Up to 85% RH

• Interface Type
• Manual controls / Digital (optional)

• Machine Weight
• Approx. 120 kg

• Max Height
• 400 mm (specimen length)

• Measuring Range
• Diameter up to 200 mm

• Mounting Type
• Floor Mounted

• Number of Specimens
• 1 - 3 (Adjustable)

• Operating Voltage
• 220V AC

• Port Size
• Standard 1/2 inch

• Power Supply
• 220V AC, 50Hz

• Resolution
• 0.5 mm

• Response Time
• Immediate

• Specimen Size
• Up to 200 mm, Customizable

• Temperature
• 10C to 40C

• Test Range
• Up to 200 mm diameter

• Test Speed
• 50 - 200 mm/min (Adjustable)

• Test Stroke
• Up to 200 mm

• Test Width
• Up to 150 mm

• Usage
• Lab and On-site Core Cutting

• Equipment Type
• Point Load Index Test Apparatus

• Accuracy
• 1% of reading

• Application
• Rock strength testing, Geotechnical investigations

• Automation Grade
• Manual

• Capacity
• Up to 100 kN

• Control Mode
• Hand-operated screw jack

• Display Type
• Analog dial

• Features
• Compact, portable, heavy-duty frame, corrosion resistant finish, easy calibration

• Hardness
• Rock sample dependent

• Humidity
• 0 - 80% RH (operating environment)

• Machine Weight
• Approx. 50 kg

• Max Height
• 350 mm sample clearance

• Measuring Range
• 0 - 100 kN

• Mounting Type
• Bench mounted

• Number of Specimens
• 1 per test

• Port Size
• Standard

• Power Supply
• Not required (Manual)

• Resolution
• 0.01 kN

• Response Time
• Immediate (manual reading)

• Specimen Size
• 50 mm to 100 mm dia. cores

• Temperature
• 0C to 50C (operating range)

• Test Range
• 0-100 kN

• Test Speed
• Manual operation

• Test Stroke
• 0-70 mm

• Test Width
• Adjustable for different core sizes

• Usage
• Laboratory and field testing of rock samples

• Equipment Type
• Rock Mechanics Testing

• Accuracy
• 1% of indicated load

• Application
• Determination of point load strength index of rocks

• Automation Grade
• Manual

• Capacity
• 10 kN (expandable optional)

• Control Mode
• Digital display with manual loading

• Display Type
• Digital LCD display

• Features
• Portable design, robust construction, easy specimen mounting

• Frequency
• 50 Hz

• Gas Pressure
• Not applicable (manual operation)

• Hardness
• Metallic body with powder coated finish

• Humidity
• Up to 90% RH, non-condensing

• Interface Type
• Digital display with push-button reset

• Machine Weight
• Approx. 50 kg

• Max Height
• Approx. 400 mm

• Measuring Range
• 0-10 kN

• Mounting Type
• Table-top

• Number of Specimens
• Single specimen at a time

• Operating Voltage
• 230V AC

• Port Size
• Standard sample holding diameter up to 100 mm

• Power Supply
• 230V AC, 50 Hz

• Resolution
• 0.01 kN

• Response Time
• Instantaneous

• Specimen Size
• 38-100 mm diameter rock cores

• Temperature
• 10C to 45C operating

• Test Range
• 10 kN (standard), up to 20 kN optional

• Test Speed
• Manual (Hand operated)

• Test Stroke
• Approx. 50 mm

• Test Width
• Suitable for up to 100 mm core specimens

• Usage
• Laboratory and field testing

• Equipment Type
• Core Cutting Machine

• Accuracy
• 2 mm

• Application
• Cutting and extracting cylindrical cores from concrete surfaces

• Automation Grade
• Manual

• Capacity
• Heavy-duty for concrete coring

• Control Mode
• Manual

• Display Type
• Analog

• Features
• Sturdy steel construction, vibration-resistance, water cooling system

• Frequency
• Engine RPM up to 3600

• Hardness
• Suitable for M10 to M50 concrete

• Humidity
• Up to 95% RH (Non-condensing)

• Interface Type
• Manual lifting and lowering controls

• Machine Weight
• Approx 110 kg

• Max Height
• Up to 1200 mm (with frame extension)

• Measuring Range
• Core diameter 50 mm to 200 mm

• Mounting Type
• Base mount

• Number of Specimens
• Single core at a time

• Operating Voltage
• Petrol engine powered, no electric connection required

• Port Size
• Core diameter up to 200 mm

• Power Supply
• Petrol Engine

• Resolution
• 1 mm

• Response Time
• Instant on operation

• Specimen Size
• 50 mm to 200 mm diameter

• Temperature
• 5C to 45C

• Test Range
• 50 mm to 200 mm core

• Test Speed
• Variable up to 800 RPM

• Test Stroke
• Up to 500 mm

• Usage
• On-site concrete coring

• Accuracy
• High - as per IS: 1199 and EFNARC guidelines

• Application
• To determine passing ability and filling ability of Self Compacting Concrete (SCC)

• Automation Grade
• Manual

• Capacity
• Capacity for single concrete mix per test

• Control Mode
• Manual

• Display Type
• Graduated Scale

• Features
• Robust Construction, Easy to Clean, Portable, Corrosion Resistant

• Hardness
• Industrial-grade Durable Plastic/Metal

• Humidity
• Ambient

• Machine Weight
• Approx. 6-8 kg

• Max Height
• 200 mm (vertical leg)

• Measuring Range
• Ratio H2/H1 (height after passing)

• Mounting Type
• Table Mount

• Number of Specimens
• Single per test

• Power Supply
• Not Required (Manual)

• Resolution
• Millimeter scale

• Response Time
• Immediate (Manual reading)

• Specimen Size
• L-box: 200 mm long vertical section, 700 mm horizontal section

• Temperature
• Ambient

• Test Range
• Suitable for fresh concrete SCC consistency

• Test Speed
• Manual Operation

• Test Width
• 65 mm (inner width of L-box)

• Usage
• Laboratory/Field SCC Testing

• Equipment Type
• Porcelain Dish

• Application
• Serving and Storage of Food

• Automation Grade
• Manual

• Capacity
• Single Dish

• Control Mode
• Manual

• Features
• Rust-resistant, Durable, Easy to Clean

• Hardness
• High (Stainless Steel Core)

• Machine Weight
• Approx. 300 grams

• Max Height
• 2 inches

• Mounting Type
• Tabletop

• Number of Specimens
• 1

• Specimen Size
• 7 inches (Diameter)

• Usage
• Commercial and Household

• Equipment Type
• V Funnel Apparatus

• Accuracy
• 1 second

• Application
• Testing flow properties of self-compacting concrete

• Automation Grade
• Manual

• Capacity
• Approx. 10 liters

• Control Mode
• Manual Operation

• Display Type
• Time measured with stopwatch (not included)

• Features
• Robust steel construction, corrosion resistant finish

• Humidity
• Suitable for ambient

• Interface Type
• Manual discharge lever

• Machine Weight
• 19 kg approximately

• Max Height
• Approx. 500 mm

• Measuring Range
• Flow time 0-30 seconds

• Mounting Type
• Portable / Stationary

• Number of Specimens
• Single Specimen at a Time

• Port Size
• 85 mm outlet

• Resolution
• 1 second

• Response Time
• Immediate (gravity flow)

• Specimen Size
• Standard for SCC

• Temperature
• Suitable for ambient

• Test Range
• Self Compacting Concrete Flow Time

• Usage
• Laboratory / Site concrete testing

• Equipment Type
• Concrete Testing Equipment

• Accuracy
• 2 mm

• Application
• Test flow and passing ability of self-compacting concrete

• Automation Grade
• Manual

• Capacity
• Suits standard slump cone

• Control Mode
• Manual

• Display Type
• Visual/Manual Scale

• Features
• Removable rods, corrosion-resistant construction, easy cleaning

• Hardness
• Rods: Mild steel (galvanized or stainless steel)

• Humidity
• Standard Laboratory Conditions (as per IS:456)

• Machine Weight
• Approx. 5 kg

• Max Height
• 300 mm

• Measuring Range
• 0-300 mm flow diameter

• Mounting Type
• Standalone, placed on horizontal surface

• Number of Specimens
• Single Test Setup

• Resolution
• 1 mm

• Response Time
• Immediate (on placement of concrete)

• Specimen Size
• Concrete Sample (as per standard SCC test methods)

• Temperature
• Ambient

• Test Range
• Self Compacting Concrete Consistency/Homogeneity

• Test Speed
• Manual (operator dependent)

• Test Width
• Inner Diameter 254 mm 2 mm

• Usage
• Assessment of SCC workability and passing ability

• Equipment Type
• U Box Apparatus

• Accuracy
• 1 mm

• Application
• Testing self-compacting and high workability concrete for passing ability

• Automation Grade
• Manual

• Capacity
• Approx. 20 liters

• Control Mode
• Manual gate operation

• Display Type
• Graduated markings

• Features
• Sturdy transparent acrylic construction, easy-to-read scale, manual lever gate, corrosion-resistant

• Hardness
• High-density acrylic/plastic body

• Humidity
• Ambient

• Machine Weight
• 18 kg

• Max Height
• 400 mm (approx.)

• Measuring Range
• 0 to 300 mm (concrete height difference)

• Mounting Type
• Table Top

• Number of Specimens
• 1

• Operating Voltage
• N/A (Manual)

• Port Size
• 50 mm gate width

• Power Supply
• Not Required (Manual Operation)

• Resolution
• 1 mm

• Response Time
• Immediate upon gate release

• Specimen Size
• Concrete with maximum aggregate size up to 25 mm

• Temperature
• Room Temperature (10C - 40C)

• Test Range
• Flowability of fresh concrete (U-Box Value: 0-300 mm)

• Test Speed
• Pre-set gravity flow

• Test Stroke
• 300 mm channel length

• Test Width
• 200 mm internal channel width

• Usage
• Laboratory & field concrete testing

• Equipment Type
• Pan Mixer

• Accuracy
• Homogeneous mix with 2% uniformity

• Application
• Mixing concrete, mortar, refractory materials

• Automation Grade
• Semi-Automatic

• Capacity
• 1000 L (custom sizes available)

• Control Mode
• Manual

• Display Type
• Analog/Meter Indicator (optional)

• Features
• Durable steel construction, replaceable wear plates, easy discharge mechanism

• Frequency
• 50 Hz

• Hardness
• Surface hardened mixing blades

• Humidity
• Upto 90% RH (Non-condensing)

• Interface Type
• Manual/Mechanical control

• Machine Weight
• 500 kg

• Max Height
• 1200 mm

• Measuring Range
• Mixing volumes 500-1000 L per batch

• Mounting Type
• Floor Mounted

• Number of Specimens
• Single batch

• Operating Voltage
• 220-240 V AC

• Port Size
• Standard discharge door (customizable)

• Power Supply
• 220-240 V, 50 Hz

• Response Time
• Immediate, continuous mixing

• Specimen Size
• Custom mix (standard 1-2 cu. m. capacity)

• Temperature
• Upto 50C operating environment

• Test Range
• Up to 2 cubic meters batch size

• Test Speed
• 30 RPM

• Test Stroke
• 750 mm

• Test Width
• 900 mm

• Usage
• Industrial construction, material testing

• Equipment Type
• Concrete Permeability Apparatus

• Accuracy
• 1% of F.S.

• Application
• Evaluate water permeability of concrete specimens

• Automation Grade
• Manual

• Capacity
• Three cell system

• Control Mode
• Manual/Analog

• Display Type
• Analog (Pressure Gauge)

• Features
• Three-chamber assembly, Pressure Regulator, Pressure Gauge, Water Reservoir, Durable Construction

• Frequency
• 50 Hz

• Gas Pressure
• 0-15 kg/cm2 (bar) max

• Hardness
• High-grade steel chambers

• Humidity
• Up to 95% RH (ambient-dependent)

• Interface Type
• Manual Input

• Machine Weight
• Approx. 80 kg

• Max Height
• Specimen: 150 mm

• Measuring Range
• 0-15 kg/cm2

• Mounting Type
• Floor/Table mounted

• Number of Specimens
• Three at a time

• Operating Voltage
• 230V

• Port Size
• Compatible for standard specimen

• Power Supply
• 230V AC, 50 Hz

• Resolution
• 0.1 kg/cm2

• Response Time
• Immediate mechanical display

• Specimen Size
• 150 mm diameter x 150 mm height

• Temperature
• Ambient

• Test Range
• 0-15 kg/cm2

• Test Speed
• Standard rate as per IS 3085

• Usage
• Laboratory testing of concrete permeability

• Equipment Type
• Shrinkage Bar Mould

• Accuracy
• High dimensional tolerance

• Application
• Used for preparing cement mortar bars for shrinkage test

• Automation Grade
• Manual

• Capacity
• 3 compartments

• Control Mode
• Manual

• Features
• Corrosion-resistant, Rigid construction, Easy to maintain

• Hardness
• High (depends on material, typically cast iron/steel)

• Machine Weight
• Approx. 3-5 kg

• Max Height
• Approx. 30 mm

• Mounting Type
• Bench-top

• Number of Specimens
• 3

• Specimen Size
• 25 mm x 25 mm x 285 mm (approx.)

• Temperature
• Ambient

• Usage
• Laboratory/Industrial

• Equipment Type
• Concrete Pocket Penetrometer

• Accuracy
• 0.25 kg/cm2

• Application
• Determining the initial set of concrete; evaluating the field strength of fresh concrete

• Automation Grade
• Manual

• Capacity
• 4.5 tons/sq.ft

• Control Mode
• Manual

• Display Type
• Analog Scale

• Features
• Lightweight, Portable, Easy to Operate, Corrosion Resistant

• Interface Type
• Direct/Manual

• Machine Weight
• 290 g approx

• Max Height
• Approx 15 cm

• Measuring Range
• 0 to 4.5 tons/sq.ft (0-4.5 kg/cm2)

• Mounting Type
• Handheld

• Number of Specimens
• Single Use

• Resolution
• 0.1 kg/cm2

• Response Time
• Instant

• Test Range
• 0 to 4.5 tons/sq.ft

• Usage
• Test Fresh Concrete

• Equipment Type
• Slump Test Apparatus

• Accuracy
• 1 mm

• Application
• Fresh concrete workability testing

• Automation Grade
• Manual

• Capacity
• Approx. 6-7 litres of concrete

• Control Mode
• Manual

• Display Type
• Not Applicable (visual measurement)

• Features
• Heavy mild steel construction, rust resistant, easy to clean, portable

• Hardness
• Mild Steel Body

• Humidity
• Ambient

• Interface Type
• Manual

• Machine Weight
• Approx. 3 kg

• Max Height
• 300 mm (cone)

• Measuring Range
• 0 - 300 mm

• Mounting Type
• Portable / Free-standing

• Number of Specimens
• One per test

• Resolution
• 1 mm

• Response Time
• Instantaneous

• Specimen Size
• 300 mm height, 200 mm base diameter, 100 mm top diameter

• Temperature
• Ambient

• Test Range
• 0 - 300 mm slump

• Test Speed
• Manual operation

• Test Stroke
• Not Applicable (used for measuring slump height)

• Test Width
• Diameter 200 mm (base)

• Usage
• Construction material testing laboratory, site testing

• Equipment Type
• Crack Detection Microscope

• Accuracy
• 0.02 mm

• Application
• Construction, Material Testing, Road/Bridge Crack Inspection

• Automation Grade
• Manual

• Control Mode
• Manual Focus

• Display Type
• Analog (Graduated Scale)

• Features
• Portable, Lightweight, High Precision Scale, Durable Housing

• Hardness
• Body: Aluminum/ABS Plastic

• Humidity
• 0-80% RH (Recommended)

• Interface Type
• Eyepiece (Visual)

• Machine Weight
• Approx. 200 g

• Max Height
• 110 mm (Approx. Microscope Length)

• Measuring Range
• 0.1 mm to 10 mm (Crack width)

• Mounting Type
• Handheld

• Number of Specimens
• Single (at a time)

• Port Size
• Eyepiece: 15 mm

• Power Supply
• Not Required (Non-Electric)

• Resolution
• 0.02 mm

• Response Time
• Instantaneous

• Specimen Size
• Various, suitable for concrete/asphalt/metal

• Temperature
• 5C to 45C Operating Range

• Test Range
• Crack Measurement up to 10 mm

• Test Speed
• Manual Operation

• Test Width
• Up to 15 mm field of view

• Usage
• Crack Measurement and Inspection

• Equipment Type
• Ultrasonic Testing Machine

• Accuracy
• 0.1 mm

• Application
• Flaw detection, material thickness measurement, weld inspection

• Automation Grade
• Manual/Semi-automatic

• Capacity
• Max. 1000 test data storage

• Control Mode
• Digital Microprocessor Based

• Display Type
• Color LCD digital display

• Features
• Portable, memory function, digital readout, probe selection

• Frequency
• 2.5 MHz to 10 MHz

• Humidity
• 85% RH

• Interface Type
• USB, RS-232

• Machine Weight
• Approx. 22 kg

• Max Height
• 300 mm (with stand)

• Measuring Range
• 0.05 mm to 500 mm

• Mounting Type
• Bench-top or portable

• Number of Specimens
• 1 at a time

• Operating Voltage
• 220V AC

• Port Size
• Standard BNC Connectors

• Power Supply
• AC 220V 10%, 50/60Hz

• Resolution
• 0.01 mm

• Response Time
• <1 second

• Specimen Size
• Diameter 10 to 200 mm

• Temperature
• 0C to 40C

• Test Range
• 0.1 mm to 500 mm (steel equivalent)

• Test Speed
• Adjustable, up to 500 mm/min

• Test Stroke
• 150 mm

• Test Width
• 100 mm

• Usage
• Non-destructive testing (NDT) for metals, plastics, composites

• Equipment Type
• Digital Rebound Hammer

• Accuracy
• 1 RN

• Application
• Concrete surface hardness & strength testing

• Automation Grade
• Automatic

• Capacity
• 1600 impacts per charge

• Control Mode
• Digital

• Display Type
• Digital LCD

• Features
• Automatic data storage, LCD digital display, Backlight, Low battery indicator

• Frequency
• Single impact

• Hardness
• 60 HRC (hammer tip)

• Humidity
• 85% RH

• Interface Type
• USB

• Machine Weight
• 2.5 kg

• Max Height
• 250 mm

• Measuring Range
• 10-70 RN

• Mounting Type
• Handheld

• Number of Specimens
• 1 per test

• Operating Voltage
• 3.7V DC

• Port Size
• Standard 16 mm

• Power Supply
• Rechargeable Lithium Battery, 3.7V

• Resolution
• 0.1 RN

• Response Time
• <1s

• Specimen Size
• Minimum thickness 100 mm

• Temperature
• -10C to 50C

• Test Range
• 10-70 Rebound Number (RN)

• Test Speed
• 0.2 m/s

• Test Stroke
• 75 mm

• Test Width
• 45 mm

• Usage
• Non-destructive concrete testing

• Equipment Type
• Concrete Test Hammer

• Accuracy
• 2 N/mm2

• Application
• Non-destructive compressive strength testing of concrete structures

• Automation Grade
• Manual

• Capacity
• 2.207 Joule on test hammer

• Control Mode
• Manual

• Display Type
• Analog scale

• Features
• Portable handheld design, Mechanical operation, No batteries required

• Hardness
• Special alloy hammer tip for high durability

• Humidity
• Up to 90% RH (non-condensing)

• Machine Weight
• 1.2 kg

• Measuring Range
• 10 - 70 N/mm2

• Mounting Type
• Handheld

• Number of Specimens
• Single Point/Spot

• Power Supply
• Not required (Mechanical Spring Operated)

• Resolution
• 1 N/mm2

• Response Time
• Immediate (Manual Read)

• Specimen Size
• Minimum thickness 100 mm

• Temperature
• 0C to 40C Operating Range

• Test Range
• 10 - 70 N/mm2

• Test Speed
• N/A (Manual)

• Test Stroke
• 75 mm

• Usage
• Surface hardness and strength assessment of concrete

• Equipment Type
• pH Indicator Paper Strips

• Accuracy
• 1 pH unit

• Application
• For rapid pH testing of liquids and solutions

• Automation Grade
• Manual

• Control Mode
• Manual

• Display Type
• Color Chart Comparison

• Features
• Easy to use, Fast response, Wide pH Range, Disposable

• Humidity
• 0-95% RH (operating humidity range)

• Measuring Range
• pH 1.0 - 14.0

• Mounting Type
• Handheld/Portable

• Number of Specimens
• 100 strips per pack (approx.)

• Resolution
• 1 pH unit

• Response Time
• Instant (within seconds)

• Specimen Size
• Approx. 6mm x 50mm (per strip)

• Temperature
• 10C to 40C (usable temperature range)

• Test Range
• pH 1 to pH 14

• Usage
• Laboratory, Educational, Industrial, Field Testing

• Equipment Type
• Water Distillation Still

• Application
• For laboratory and medical water distillation

• Automation Grade
• Manual

• Capacity
• 2 liters/hour

• Control Mode
• Manual

• Features
• Quartz glass construction, corrosion-resistant, energy efficient

• Frequency
• 50 Hz

• Machine Weight
• 5 kg (approx)

• Max Height
• Approx. 40 cm

• Mounting Type
• Bench-top

• Operating Voltage
• 230V AC

• Port Size
• Standard glass outlets

• Power Supply
• 230V AC, 50 Hz

• Temperature
• Ambient to boiling point of water (up to 100C)

• Usage
• Producing distilled water

• Equipment Type
• Vertical Autoclave Sterilizer

• Accuracy
• 2C

• Application
• Sterilization of laboratory and medical instruments

• Automation Grade
• Semi-Automatic / Fully Automatic Available

• Capacity
• 35 liters

• Control Mode
• Manual / Automatic

• Display Type
• Analog / Digital (optional)

• Features
• Double safety valve, pressure gauge, temperature controller, stainless steel construction, energy efficient

• Frequency
• 50 Hz

• Hardness
• Corrosion-resistant, rust-proof

• Humidity
• Up to 85% RH

• Machine Weight
• 85 kg

• Max Height
• 900 mm

• Mounting Type
• Floor Standing

• Operating Voltage
• 220 V

• Port Size
• 1/2 inch

• Power Supply
• 220 V AC, 50 Hz

• Resolution
• 1C

• Response Time
• Approx. 10 minutes to reach max temperature

• Temperature
• Up to 134C

• Usage
• Laboratory, Hospital, Research Institutes

• Equipment Type
• Carbon and Sulphur Determination Apparatus

• Accuracy
• 0.01%

• Application
• Determination of carbon and sulphur content in metals and alloys

• Automation Grade
• Manual

• Capacity
• Depends on sample load per test

• Control Mode
• Manual

• Display Type
• Digital analog display for reading end-point

• Features
• Robust construction, easy to operate, precise measurement, corrosion resistant parts

• Frequency
• 50 Hz

• Gas Pressure
• 0.5 to 1 kg/cm2

• Humidity
• Up to 85% RH

• Interface Type
• Manual operation

• Machine Weight
• Approx. 35 kg

• Max Height
• Approx. 500 mm

• Measuring Range
• As per Test Range

• Mounting Type
• Benchtop

• Number of Specimens
• Single at a time

• Operating Voltage
• 230V AC

• Port Size
• Standard gas inlet and outlet ports

• Power Supply
• 230 V AC, 50 Hz

• Resolution
• 0.001%

• Response Time
• 1 cycle/test (approx. 4-8 minutes)

• Specimen Size
• 1 gm (approx., powdered sample)

• Temperature
• Ambient to 1000C (depends on combustion furnace)

• Test Range
• Carbon 0.01% to 6%, Sulphur 0.01% to 2%

• Usage
• For laboratory use in foundries, steel plants, research labs

• Equipment Type
• Horizontal/Vertical Laminar Air Flow Cabinet

• Application
• Laboratory, microbiology, clean room, pharmaceutical research

• Automation Grade
• Semi-automatic

• Capacity
• Varies by internal workspace (between 2 ft, 3 ft, and 4 ft models)

• Control Mode
• Microprocessor-based controller

• Display Type
• Digital

• Features
• HEPA filtered, UV lamp, fluorescent light, low noise operation

• Frequency
• 50 Hz

• Humidity
• Up to 75% RH (operating)

• Interface Type
• Analog/Touch Panel

• Machine Weight
• 100-250 kg (varies by size/model)

• Max Height
• Up to 6 ft (model dependent)

• Mounting Type
• Table Top or Floor mounted

• Operating Voltage
• 220V, 1 Phase

• Port Size
• Standard front access port

• Power Supply
• 220V AC, 50 Hz

• Response Time
• Immediate airflow response

• Temperature
• 10C - 40C (operating)

• Usage
• Protection from contamination during sensitive work

• Equipment Type
• Dean and Stark Apparatus

• Accuracy
• 0.1 ml (depending on receiver tube graduation)

• Application
• Determination of water content in solvents, oils, emulsions; azeotropic distillation

• Automation Grade
• Manual

• Capacity
• Typically 50 ml, 100 ml, 250 ml (receiver tube); flask up to 2 Litres

• Control Mode
• Manual

• Display Type
• Graduated glass receiver

• Features
• Borosilicate glass, leakproof joints, accurate graduations, chemical resistance

• Hardness
• 7 Mohs (borosilicate glass)

• Interface Type
• Glassware joints; manual operation

• Machine Weight
• Depends on capacity (typically 500-1000 g for standard setup)

• Max Height
• Glassware height up to 500 mm depending on flask size

• Measuring Range
• 0-100 ml or as per receiver volume

• Mounting Type
• Tabletop with support stand/clamp

• Number of Specimens
• Single per setup

• Port Size
• 24/29 (neck joint); receiving tube volume: 2-100 ml as per setup

• Power Supply
• Not required (runs without electricity)

• Resolution
• 0.1 ml

• Response Time
• Immediate (visual observation)

• Specimen Size
• Depends on flask size (commonly 100 ml - 2 Litres)

• Temperature
• Up to 250C (commonly used with heating mantle or oil bath)

• Usage
• Laboratory chemical analysis, moisture determination

• Equipment Type
• Jar Test Apparatus

• Accuracy
• 2 RPM

• Application
• Coagulation and Flocculation Testing in Water Treatment Plants

• Automation Grade
• Semi-Automatic

• Capacity
• 6 x 1 Litre (Jars)

• Control Mode
• Digital Microprocessor Control

• Display Type
• Digital LED Display

• Features
• Digital speed indicator, synchronous motor, timer, uniform illumination, easy operation

• Frequency
• 50 Hz

• Humidity
• Up to 85% RH non-condensing

• Interface Type
• Keypad/Touch Panel

• Machine Weight
• Approx. 12 kg

• Max Height
• Approx. 500 mm

• Measuring Range
• 20-180 RPM

• Mounting Type
• Benchtop

• Number of Specimens
• 6 stirring units

• Operating Voltage
• 230V AC

• Power Supply
• 230V AC, 50 Hz

• Resolution
• 1 RPM

• Response Time
• Instantaneous

• Specimen Size
• 1000 ml Jar Capacity

• Temperature
• Ambient

• Test Range
• 20-180 RPM

• Test Speed
• Variable, 20-180 RPM

• Usage
• Laboratory/Water Analysis

• Equipment Type
• Digital Nephelometer

• Accuracy
• 2% F.S.R.

• Application
• Measurement of turbidity in water and liquid samples

• Automation Grade
• Semi-automatic

• Control Mode
• Microprocessor based digital control

• Display Type
• Digital LED display

• Features
• Auto zero, compact design, high accuracy

• Frequency
• 50 Hz

• Humidity
• Upto 80% RH non-condensing

• Machine Weight
• 2.5 kg (approx.)

• Measuring Range
• 0 NTU to 1000 NTU

• Mounting Type
• Bench-top

• Number of Specimens
• 1 at a time

• Operating Voltage
• 230 VAC

• Port Size
• Standard sample tube port

• Power Supply
• 230V 10%, 50 Hz AC

• Resolution
• 0.1 NTU

• Response Time
• <2 seconds

• Specimen Size
• 10 ml sample volume

• Temperature
• 10C to 50C (operating)

• Test Range
• 0 NTU to 1000 NTU

• Test Speed
• Standard (as per instrument)

• Usage
• Laboratory and industrial use

• Equipment Type
• Bench Conductivity Meter

• Accuracy
• 1% F.S.

• Application
• Laboratory, Industrial Water Analysis, Research & Quality Control

• Automation Grade
• Semi-Automatic

• Control Mode
• Manual / Automatic

• Display Type
• LCD Digital Display

• Features
• Auto Temperature Compensation, Data Hold, Clear Display

• Frequency
• 50/60 Hz

• Humidity
• 85% RH

• Interface Type
• RS232 (optional)

• Machine Weight
• 2.5 kg

• Measuring Range
• 0.00 S/cm to 199.9 mS/cm

• Mounting Type
• Bench Top

• Operating Voltage
• 220V AC

• Power Supply
• AC 220V 10%, 50/60Hz

• Resolution
• 0.01 S/cm / 0.1 S/cm / 0.1 mS/cm

• Response Time
• <1 sec

• Temperature
• 5C to 40C

• Test Range
• 0.00 S/cm to 199.9 mS/cm

• Usage
• Conductivity Measurement

• Equipment Type
• Humidity Test Chamber

• Accuracy
• 2% RH, 0.5C

• Application
• Environmental testing, humidity and temperature resistance testing

• Automation Grade
• Automatic

• Capacity
• 80 L to 300 L

• Control Mode
• Programmable microprocessor-based controller

• Display Type
• Digital touch screen

• Features
• Automatic water supply, over-heat protection, safety alarms

• Frequency
• 50 Hz

• Gas Pressure
• Ambient atmospheric pressure

• Hardness
• Corrosion resistant stainless steel inner chamber

• Humidity
• 30% - 98% RH adjustable

• Interface Type
• RS-232 / USB

• Machine Weight
• Approx. 150-250 kg depending on chamber size

• Max Height
• 1800 mm

• Measuring Range
• Humidity: 30-98% RH, Temperature: -20C to +100C

• Mounting Type
• Floor mounted

• Number of Specimens
• Up to 20 specimens

• Operating Voltage
• 220V AC

• Port Size
• 50 mm

• Power Supply
• 220V / 50Hz AC single phase

• Resolution
• 0.1% RH, 0.1C

• Response Time
• Within 5 minutes for set value

• Specimen Size
• Customized as per requirement

• Temperature
• -20C to +100C

• Test Range
• 30% - 98% RH / -20C to +100C

• Test Speed
• Adjustable

• Test Stroke
• 0 - 1000 mm

• Test Width
• 400 mm - 800 mm

• Usage
• Testing material and product resistance to humidity and temperature

• Equipment Type
• Cement Sampler

• Accuracy
• High; suitable for quality sampling

• Application
• Sampling cement from bags, containers, or bulk materials

• Automation Grade
• Manual

• Capacity
• Single Point Sampling

• Control Mode
• Handheld

• Features
• Corrosion-resistant material, ergonomic handle, reusable, easy to clean

• Hardness
• Available in stainless steel/hardened brass

• Humidity
• Ambient

• Interface Type
• Manual

• Machine Weight
• Approx. 350 g

• Max Height
• Approx. 30-40 cm

• Measuring Range
• Full Depth of Cement Container

• Mounting Type
• Handheld

• Number of Specimens
• 1 per operation

• Port Size
• 25 mm

• Response Time
• Immediate

• Specimen Size
• Variable as per container depth

• Temperature
• Ambient

• Test Range
• Surface to depth of cement container

• Test Speed
• Manual

• Test Width
• 25 mm diameter bore

• Usage
• For collecting cement samples for laboratory analysis

• Equipment Type
• Vicat Needle Apparatus

• Accuracy
• 0.5 mm

• Application
• Determination of setting time and consistency of cement, gypsum, and similar materials

• Automation Grade
• Manual

• Capacity
• 300 g moving weight

• Control Mode
• Manual

• Display Type
• Graduated scale

• Features
• Movable frame, graduated scale, replaceable needles, sturdy base

• Hardness
• Corrosion resistant brass construction

• Humidity
• Ambient laboratory environment

• Interface Type
• Manual

• Machine Weight
• Approx. 3 kg

• Max Height
• Approx. 200 mm (overall)

• Measuring Range
• 0 - 50 mm penetration

• Mounting Type
• Bench Top

• Number of Specimens
• 1 at a time

• Port Size
• Standard Vicat frame size

• Power Supply
• Not required (manual device)

• Resolution
• 0.5 mm scale

• Response Time
• Immediate

• Specimen Size
• Vicat test mould: 80 mm dia x 40 mm height

• Temperature
• Ambient, 27 2C recommended

• Test Range
• 0 - 50 mm (penetration scale)

• Test Speed
• Manual operation

• Test Stroke
• Up to 50 mm penetration

• Test Width
• Standard test mold width (as per IS: 5513)

• Usage
• Laboratory test for cement and binding materials

• Equipment Type
• Vibrating Table

• Accuracy
• 1%

• Application
• Compaction of cement concrete, tiles, blocks, and laboratory samples

• Automation Grade
• Semi-Automatic/Automatic

• Capacity
• 100 kg max load

• Control Mode
• Manual/Automatic

• Display Type
• Digital or Analog (as per requirement)

• Features
• Heavy-duty motor, Sturdy construction, Adjustable vibration, Powder coated finish, Rubber mounting feet for stability

• Frequency
• 50 Hz

• Hardness
• Construction Grade Steel Table Top, 55-60 HRC

• Humidity
• 5% - 95% RH (non-condensing)

• Interface Type
• Manual Controls or PLC

• Machine Weight
• Approx. 200 kg

• Max Height
• 700 mm (approx)

• Measuring Range
• 0-100 kg (Load)

• Mounting Type
• Floor Mounted

• Number of Specimens
• 1-4 Specimens at a time

• Operating Voltage
• 220V AC

• Port Size
• Standard

• Power Supply
• 220V / 50Hz, Single Phase

• Resolution
• 0.1 kg

• Response Time
• <2 seconds

• Specimen Size
• Customizable (Standard: 300x300 mm each)

• Temperature
• 0C - 50C Operating Temperature

• Test Range
• 0-100 kg Load

• Test Speed
• Up to 3600 Vibrations Per Minute (Adjustable)

• Test Stroke
• 0-6 mm (Adjustable)

• Test Width
• 600 mm

• Usage
• Laboratory/Industrial testing

• Equipment Type
• Motorized Flow Table

• Accuracy
• 1 mm

• Application
• To determine the workability/flow property of cement mortar by flow table method

• Automation Grade
• Semi-Automatic

• Capacity
• Suitable for standard cement mortar testing

• Control Mode
• Motorized, push-button operation

• Display Type
• Analog/Manual reading scale

• Features
• Mild steel table, solid construction, heavy-duty motor, non-slip base, easy to operate, corrosion-resistant finish

• Frequency
• 50 Hz

• Hardness
• Mild steel, table surface hardened

• Humidity
• Ambient

• Interface Type
• Manual push-button

• Machine Weight
• Approx. 40-50 kg

• Max Height
• Approx. 350 mm

• Measuring Range
• 0-40 mm flow value

• Mounting Type
• Table-top

• Number of Specimens
• 1 at a time

• Operating Voltage
• 230 V AC

• Port Size
• Standard funnel port for mortar

• Power Supply
• 230 V AC, Single Phase, 50 Hz

• Resolution
• 1 mm

• Response Time
• Immediate/manual

• Specimen Size
• Flow mould 100 mm (dia) x 50 mm (height)

• Temperature
• Ambient

• Test Range
• Consistency and flow of cement mortar

• Test Speed
• 30 1 rpm

• Test Stroke
• 10 mm

• Test Width
• 300 mm

• Usage
• Laboratory & educational

• Equipment Type
• Flow Table Hand Operated

• Accuracy
• 1 mm

• Application
• Determining flow of cement, concrete, or mortar

• Automation Grade
• Manual

• Capacity
• One test at a time

• Control Mode
• Hand Operated Lever

• Display Type
• Manual Scale

• Features
• Sturdy base, Brass tabletop, Removable handle

• Humidity
• Ambient

• Machine Weight
• Approx. 15 kg

• Max Height
• Approx. 100 mm

• Measuring Range
• 0-25 cm (standard scale graduation)

• Mounting Type
• Bench Mounted

• Number of Specimens
• 1 at a time

• Resolution
• 1 mm

• Response Time
• Immediate

• Specimen Size
• 100 mm diameter, 50 mm height approx.

• Temperature
• Ambient

• Test Range
• Standard Cement Mortar Flow Test

• Test Speed
• Manual (Hand Operated)

• Test Width
• 300 mm

• Usage
• Laboratory Testing

• Equipment Type
• Laboratory Cement Autoclave

• Accuracy
• 1% of full scale (Pressure Gauge)

• Application
• Accelerated soundness test on cement/mortar

• Automation Grade
• Manual

• Capacity
• 8 Litres (Chamber Volume)

• Control Mode
• Manual with Safety Pressure Release Valve

• Display Type
• Analog Gauge for Pressure; Mercury Thermometer for Temperature

• Features
• Stainless steel chamber, outer covering mild steel; pressure gauge, safety valve, pressure release cock, Asbestos Gasket

• Frequency
• 50 Hz

• Gas Pressure
• Max working pressure: 21 kg/cm2 (300 psi)

• Interface Type
• Manual Valves

• Machine Weight
• 21 kg (approx)

• Max Height
• Approx. 600 mm (with all accessories)

• Measuring Range
• 0-21 kg/cm2 (0-300 psi)

• Mounting Type
• Table Top

• Number of Specimens
• 1 per cycle (as per IS: 4031, IS: 1624)

• Operating Voltage
• 220-240V AC

• Port Size
• Inlet & Outlet Valve: Standard Autoclave Fittings

• Power Supply
• 220-240V AC, 50 Hz, Single Phase

• Resolution
• 0.2 kg/cm2 (Pressure Gauge)

• Response Time
• Immediate (Gauge Response)

• Specimen Size
• Cylindrical, up to 25 mm diameter x 25 mm height

• Temperature
• Max working temperature: 215C

• Test Range
• Pressure up to 21 kg/cm2

• Usage
• Soundness test of cement under pressure

• Equipment Type
• Laboratory Pan Mixer

• Accuracy
• Consistent and uniform mixing

• Application
• Mixing cement, concrete, mortar in laboratory

• Automation Grade
• Semi-Automatic

• Capacity
• 40 Litres

• Control Mode
• Manual

• Display Type
• Analog (On/Off indicators)

• Features
• Heavy-duty construction, removable pan, easy to operate and clean

• Frequency
• 50 Hz

• Humidity
• Up to 95% RH (non-condensing)

• Interface Type
• Manual controls

• Machine Weight
• Approx. 110 Kg

• Max Height
• Approx. 950 mm

• Mounting Type
• Floor mounted

• Number of Specimens
• Single batch

• Operating Voltage
• 220V

• Power Supply
• 220V AC, Single Phase, 50 Hz

• Response Time
• Immediate (On starting the mixer)

• Specimen Size
• Up to 40 Litre

• Temperature
• Ambient

• Test Range
• Mixing of aggregates up to 40 Litre

• Test Speed
• 20-30 rpm

• Usage
• Laboratory testing and mixing operations

• Equipment Type
• Mortar Cube Vibrator

• Accuracy
• 2% of set frequency

• Application
• Compacting mortar specimens for strength testing

• Automation Grade
• Semi-automatic

• Capacity
• Up to 3 mortar cubes

• Control Mode
• Digital Control

• Display Type
• Digital LED display

• Features
• Sturdy construction, automatic preset timer, consistent vibration, low maintenance

• Frequency
• 50 Hz

• Humidity
• Up to 90% RH

• Interface Type
• Push Button Control

• Machine Weight
• Approx. 60 kg

• Max Height
• Approx. 425 mm

• Measuring Range
• Preset vibration cycle

• Mounting Type
• Table Top

• Number of Specimens
• Up to 3 specimens

• Operating Voltage
• 230 V AC

• Power Supply
• 230 V AC, 50 Hz

• Resolution
• Digital

• Response Time
• Immediate

• Specimen Size
• 70.6 mm cube

• Temperature
• 5C to 40C

• Test Range
• Standard Mortar Mix

• Test Speed
• 12000 400 vibrations per minute

• Usage
• Laboratory and field tests

• Equipment Type
• Flow Table Apparatus

• Accuracy
• 1 mm

• Application
• Determining consistency & workability of cement concrete

• Automation Grade
• Motorized/Automatic

• Capacity
• 15 kg load capacity

• Control Mode
• Motorized, automatic timer control

• Display Type
• Analog graduated scale

• Features
• Heavy duty motor, sturdy construction, anti-skid feet, with conical mould

• Frequency
• 50 Hz

• Hardness
• Metal table, surface hardened

• Humidity
• Up to 90% RH

• Interface Type
• Manual mechanical/analog

• Machine Weight
• Approx. 45 kg

• Max Height
• 350 mm overall height

• Measuring Range
• 0 - 340 mm flow diameter

• Mounting Type
• Benchtop/Tabletop

• Number of Specimens
• 1 (per test)

• Operating Voltage
• 230V

• Port Size
• Standard, for mould attachment

• Power Supply
• 230 V AC, 50 Hz, single phase

• Resolution
• 1 mm

• Response Time
• Immediate/manual observation

• Specimen Size
• 100 mm top diameter, 200 mm base diameter, 50 mm height (standard cone)

• Temperature
• 10C - 40C operating

• Test Range
• Up to 340 mm concrete flow

• Test Speed
• 60 cycles per minute

• Test Stroke
• 12.5 mm per cycle

• Test Width
• 250 mm (table diameter)

• Usage
• Laboratory, civil engineering testing

• Accuracy
• 0.001 g/cm3

• Application
• Measurement of liquid density in laboratory settings

• Automation Grade
• Manual

• Capacity
• 25 ml, 50 ml, 100 ml, 250 ml, 500 ml (varies as per model)

• Display Type
• None (manual measurement via volume markings and balance)

• Measuring Range
• Varies with bottle size, typically suitable for most laboratory liquids

• Resolution
• 0.0001 g/cm3

• Usage
• Analytical laboratory procedures

• Equipment Type
• Briquette Mould (Single)

• Accuracy
• Depends on dimensional tolerance

• Application
• Preparation of cement mortar briquettes for tensile strength tests

• Automation Grade
• Manual

• Capacity
• Single Briquette

• Control Mode
• Manual operation

• Features
• Single cavity, heavy-duty construction, reusable

• Hardness
• High due to metallic construction

• Humidity
• Ambient

• Machine Weight
• Approx. 1.8 kg

• Max Height
• Approx. 25 mm (briquette height)

• Mounting Type
• Bench/Laboratory/Land based

• Number of Specimens
• Single

• Specimen Size
• Standard briquette size (Approx. 25mm x 25mm x 75mm)

• Temperature
• Room Temperature

• Test Speed
• Manual

• Test Width
• 38 mm (briquette width)

• Usage
• For laboratory cement & mortar specimen moulding

• Equipment Type
• Volume Change Apparatus

• Accuracy
• 0.01 mm

• Application
• Determination of volume change of soil specimens during swelling, shrinkage or consolidation tests

• Automation Grade
• Manual

• Capacity
• Up to 1000 ml (Graduated cylinder)

• Control Mode
• Dial Gauge & Graduated Cylinder

• Display Type
• Mechanical (Dial Gauge)

• Features
• Corrosion-resistant construction, Portable, Simple operation

• Humidity
• Ambient

• Machine Weight
• Approx. 20 kg

• Max Height
• Approx. 300 mm (assembled)

• Measuring Range
• Up to 12 mm linear displacement

• Mounting Type
• Bench/Tabletop

• Number of Specimens
• 1 at a time

• Operating Voltage
• Not required (Manual)

• Port Size
• Custom as per specimen

• Power Supply
• Not Required (Manual device)

• Resolution
• 0.01 mm (Dial gauge)

• Response Time
• Immediate (manual reading)

• Specimen Size
• 38 mm or 100 mm diameter x 20 mm height (standard options)

• Temperature
• Ambient

• Test Range
• 0-12 mm volume change

• Test Speed
• Manual Operation

• Test Stroke
• Up to 12 mm (adjustable)

• Test Width
• 50 mm

• Usage
• Laboratory Soil Testing

• Equipment Type
• Air Permeability Tester

• Accuracy
• 2% of reading

• Application
• Textiles, Nonwovens, Paper, Leather, Synthetic fabrics

• Automation Grade
• Semi Automatic / Automatic

• Capacity
• Up to 9999 tests

• Control Mode
• Digital / Manual

• Display Type
• Digital LCD Display

• Features
• Automatic measurement, Data output, Memory function, Auto clamp

• Frequency
• 50/60 Hz

• Gas Pressure
• 0.2 to 1 bar

• Humidity
• 20% - 80% RH (Operating)

• Interface Type
• RS232/USB (Optional)

• Machine Weight
• Approx. 25 kg

• Max Height
• 350 mm

• Measuring Range
• 0.1 to 12000 mm/s or as per requirement

• Mounting Type
• Bench Top

• Number of Specimens
• Single Specimen at a time

• Operating Voltage
• 220-240 V AC, 50/60 Hz

• Port Size
• 38 cm2 / Optional as per standard

• Power Supply
• 230V, 50Hz AC

• Resolution
• 0.01 mm/s

• Response Time
• <2 Seconds

• Specimen Size
• 200 mm x 200 mm

• Temperature
• 15C - 35C (Operating)

• Test Range
• 0.1 to 12000 mm/s

• Test Speed
• Standard / Adjustable

• Test Stroke
• 100 mm

• Test Width
• Up to 380 mm

• Usage
• Laboratory, Industrial Testing

• Equipment Type
• Hand Tool

• Application
• Mixing, Spreading, and Scraping in Laboratory or Kitchen

• Automation Grade
• Manual

• Control Mode
• Manual

• Features
• Wooden Handle, Stainless Steel Blade, Durable

• Machine Weight
• Approx. 70 grams

• Max Height
• Approx. 200 mm

• Mounting Type
• Handheld

• Specimen Size
• Standard (Approx. 200 mm length)

• Usage
• Mixing, Spreading, Scraping

• Equipment Type
• Prism Mould

• Accuracy
• Precision machining ensures accuracy in specimen dimensions

• Application
• Preparation of cement and mortar specimens for compression/flexural strength tests

• Automation Grade
• Manual

• Capacity
• Three Prisms

• Control Mode
• Manual

• Features
• Corrosion-resistant, rigid construction, detachable base, easy demoulding

• Hardness
• High-grade steel, chrome plated

• Humidity
• Ambient

• Machine Weight
• Approx. 6.5 kg

• Max Height
• Approx. 40 mm (Specimen Height)

• Mounting Type
• Bench-top/Portable

• Number of Specimens
• 3

• Power Supply
• Not Required (Manual Operation)

• Specimen Size
• 40 mm x 40 mm x 160 mm

• Temperature
• Ambient

• Usage
• Laboratory, Construction Material Testing

• Equipment Type
• Length Comparator with Dial Gauge

• Accuracy
• 0.01 mm

• Application
• For precise measurement of changes in length of cement, mortar, and concrete specimens

• Automation Grade
• Manual

• Capacity
• Standard laboratory

• Control Mode
• Comparator gauge with manual lever

• Display Type
• Dial Gauge

• Features
• High precision, rigid construction, adjustable specimen supports, easy operation

• Hardness
• Stand made of hardened steel

• Humidity
• Operating range: 40% - 70% RH

• Interface Type
• Manual/Analog

• Machine Weight
• Approx. 30 kg

• Max Height
• Approx. 300 mm specimen clearance

• Measuring Range
• 0-10 mm (Dial Gauge)

• Mounting Type
• Bench Top

• Number of Specimens
• 1 at a time

• Power Supply
• Not required (manual device)

• Resolution
• 0.001 mm

• Response Time
• Instant (mechanical)

• Specimen Size
• Up to 250 mm length (other sizes upon request)

• Temperature
• Operating range: 20C 2C

• Test Range
• 0 - 10 mm (standard gauge supplied)

• Test Speed
• Manual operation

• Test Stroke
• Up to 100 mm

• Test Width
• Standard

• Usage
• For laboratory testing of cement/concrete samples

• Equipment Type
• Viscosity Measurement Apparatus

• Accuracy
• 1 second

• Application
• Determining flow time (viscosity) of muds and other liquids

• Automation Grade
• Manual

• Capacity
• 1000 ml (1 litre)

• Control Mode
• Manual

• Display Type
• Manual (stopwatch required)

• Features
• Corrosion-resistant construction, Detachable screen, Easy-to-clean

• Humidity
• Ambient humidity

• Machine Weight
• 7 kg (approx)

• Max Height
• 410 mm (approx, with tripod)

• Measuring Range
• 0-100 seconds (flow time)

• Mounting Type
• Bench-top/portable

• Number of Specimens
• Single test per operation

• Port Size
• Internal diameter 10 mm (Typical)

• Resolution
• 1 second

• Response Time
• Immediate (on lifting finger)

• Specimen Size
• One liter sample capacity

• Temperature
• Ambient temperature

• Test Range
• Marsh viscosity from 0 to 100 seconds

• Test Speed
• Gravity operated (Standard flow rate)

• Usage
• Laboratory, Field Testing

• Accuracy
• 0.5C

• Application
• Biological research, medical labs, serological testing, incubation

• Automation Grade
• Semi-automatic

• Capacity
• 6 L / 12 L / 24 L (model specific)

• Control Mode
• Digital temperature controller

• Display Type
• Digital LED display

• Features
• Double walled chamber, corrosion resistant stainless steel, energy efficient, thermal insulation, drain plug, fitted cover

• Frequency
• 50 Hz

• Humidity
• Not controlled

• Interface Type
• Manual or push button control

• Machine Weight
• Approximately 8-10 kg (varies by model and capacity)

• Max Height
• Varies with model

• Measuring Range
• Ambient +5C to 99C

• Mounting Type
• Table-top

• Number of Specimens
• Varies based on rack arrangement

• Operating Voltage
• 220V AC

• Power Supply
• 220V AC, 50 Hz

• Resolution
• 0.1C

• Response Time
• Rapid heating with PID control

• Specimen Size
• Accommodates standard serological test tubes and samples

• Temperature
• 5C above ambient to 99C ( 0.5C)

• Usage
• Serological and laboratory sample incubations

• Equipment Type
• Wire Basket

• Accuracy
• 1%

• Application
• Laboratory, Research, Chemical Storage, Density Testing

• Automation Grade
• Manual

• Capacity
• Up to 10 kg

• Control Mode
• Manual

• Features
• Corrosion Resistant, Lightweight, High Strength, Reusable

• Hardness
• High (dependent on stainless steel)

• Humidity
• 0-80% RH (Non-condensing)

• Machine Weight
• Approx. 2.5 kg

• Max Height
• 150 mm

• Measuring Range
• Varies as per sample size

• Mounting Type
• Free standing

• Number of Specimens
• As per basket size

• Resolution
• 0.1 g

• Response Time
• Immediate

• Specimen Size
• Customizable / 200 mm x 150 mm (Typical)

• Temperature
• -10C to 80C

• Test Range
• Suitable for multiple items

• Test Speed
• Manual

• Test Width
• 150 mm

• Usage
• Density measurement and laboratory ware

• Equipment Type
• Flexural Testing Machine

• Accuracy
• 1% of indicated load

• Application
• Tile Flexural/Bending Strength Test

• Automation Grade
• Semi-Automatic / Manual

• Capacity
• 5 kN, 10 kN options

• Control Mode
• Manual / Semi-Automatic

• Display Type
• Digital

• Features
• Robust Construction, Easy to Operate

• Frequency
• 50 Hz

• Humidity
• Up to 85% RH (Non-condensing)

• Interface Type
• RS232/USB (Optional)

• Machine Weight
• Approx. 90-120 Kg

• Max Height
• Approx. 450 mm

• Measuring Range
• 0-20 kN

• Mounting Type
• Floor Standing

• Number of Specimens
• 1 at a time

• Operating Voltage
• 220/230V AC

• Port Size
• Standard

• Power Supply
• 230V AC, 50Hz

• Resolution
• 0.01 kN

• Response Time
• 1 second

• Specimen Size
• Up to 400 x 100 mm

• Temperature
• 10C to 40C Operating

• Test Range
• 0-2000 kgf

• Test Speed
• 50 mm/min (Adjustable)

• Test Stroke
• 150 mm

• Test Width
• Up to 400 mm

• Usage
• Tiles, Ceramics, Building Materials

• Equipment Type
• Le Chatelier Flask

• Accuracy
• 0.1 ml

• Application
• Specific gravity determination of hydraulic cements and lime

• Automation Grade
• Manual

• Capacity
• 24 ml

• Control Mode
• Manual

• Display Type
• Graduated glass scale

• Features
• Clear glass, conical base, precise graduation, easy to clean

• Hardness
• Borosilicate Glass ~5-6 Mohs

• Humidity
• 0-100% (inert to moisture)

• Machine Weight
• Approx. 80 g

• Max Height
• Approx. 200 mm

• Measuring Range
• 0-24 ml (graduated scale)

• Mounting Type
• Tabletop/Laboratory bench

• Number of Specimens
• Single flask per test

• Port Size
• Standard neck for stopper fitment

• Resolution
• 0.1 ml

• Response Time
• Immediate (manual reading)

• Specimen Size
• Holds 24 ml for specific gravity determination

• Temperature
• Ambient, glass resistant to 400C

• Usage
• Laboratory test for cement/lime/mortar

• Equipment Type
• Laboratory Apparatus

• Accuracy
• 1% of reading

• Application
• Determination of fineness of cement and other powders

• Automation Grade
• Manual

• Capacity
• One test at a time

• Control Mode
• Manual

• Display Type
• Analog Manometer

• Features
• Portable, easy to operate, supplied with reference standard

• Gas Pressure
• Ambient atmospheric pressure

• Humidity
• Standard lab conditions

• Interface Type
• Manual (no electronic interface)

• Machine Weight
• Approx. 3.5 kg

• Max Height
• Approx. 300 mm (assembled)

• Measuring Range
• 150-7000 cm2/g

• Mounting Type
• Bench-top

• Number of Specimens
• Single specimen per test

• Port Size
• Standard fitting

• Power Supply
• Not Required (Manual)

• Resolution
• 1 cm2/g

• Response Time
• Immediate/Manual observation

• Specimen Size
• 40 mm diameter x 50 mm height

• Temperature
• Room temperature (20C - 27C)

• Test Range
• 150-7000 cm2/g (permeability)

• Test Speed
• Manual operation

• Usage
• Laboratory testing of cement fineness

• Equipment Type
• Flakiness Index Gauge

• Accuracy
• Depends on operator skill and standard compliance

• Application
• Laboratory Determination of Flakiness Index of Aggregates

• Automation Grade
• Manual

• Capacity
• Designed for regular laboratory samples

• Control Mode
• Manual

• Features
• Portable, Stainless steel slots, Durable

• Hardness
• Stainless steel construction for durability

• Humidity
• Ambient

• Machine Weight
• 1.5 kg (approx)

• Max Height
• Approx 150 mm

• Measuring Range
• Standard aggregate range per Indian Standard

• Mounting Type
• Hand-held / Table-top

• Number of Specimens
• Multiple aggregates can be tested simultaneously

• Resolution
• Determined by slot size

• Response Time
• Immediate (manual)

• Specimen Size
• 10 mm to 63 mm aggregates

• Temperature
• Ambient

• Test Range
• As per IS: 2386 (Part 1) standard sizes

• Test Speed
• Manual operation

• Test Width
• Various slots as per IS 2386 standards

• Usage
• Aggregate shape analysis in civil engineering labs

• Equipment Type
• Dorry Abrasion Testing Machine

• Accuracy
• 1 g

• Application
• Laboratory testing of stone, aggregate and mineral specimen abrasion strength

• Automation Grade
• Manual

• Capacity
• Load up to 30 kg

• Control Mode
• Manual Mechanical Operation

• Display Type
• Analog scale with pointer

• Features
• Cast iron structure, replaceable abrasion wheels, easy operation, high stability, corrosion resistant finish

• Frequency
• 50 Hz

• Hardness
• Material: Hardened steel wheels HRC 602

• Humidity
• Ambient (up to 85% RH)

• Interface Type
• Mechanical interface

• Machine Weight
• Approx. 80-120 kg

• Max Height
• Approx. 350 mm

• Measuring Range
• 0 - 500 g (abrasion loss)

• Mounting Type
• Bench-top

• Number of Specimens
• 1

• Operating Voltage
• 230 V AC

• Port Size
• Standard discharge with 1/2 to 1 coupling

• Power Supply
• 230V AC, 50 Hz

• Resolution
• 1 g

• Response Time
• Instantaneous

• Specimen Size
• Diameter 25 mm x Height 25 mm

• Temperature
• Room temperature (10C to 40C)

• Test Range
• 0 - 500 g loss (abrasion measurement)

• Test Speed
• 28-30 rpm (Revolutions per minute)

• Test Stroke
• Up to 250 mm

• Test Width
• Wheel Width: 50 mm

• Usage
• Abrasion resistance test for aggregates or stones

• Equipment Type
• Aggregate Crushing Value Apparatus

• Accuracy
• Complies with IS: 2386 (Part IV) standards

• Application
• Determination of crushing strength of aggregates

• Automation Grade
• Manual

• Capacity
• 2.5 kg of aggregate per test

• Control Mode
• Manual

• Display Type
• Manual observation (no digital display)

• Features
• Heavy-duty body, precision machining, removable base plate, hardened steel plunger and base plate, corrosion-resistant finish

• Frequency
• As per test requirement

• Hardness
• Body and plunger made from hardened alloy steel

• Humidity
• Not affected

• Machine Weight
• Approx. 12 kg

• Max Height
• Approx. 250 mm

• Measuring Range
• 0-100% crushing value

• Mounting Type
• Table/Floor mounted

• Number of Specimens
• 1 per operation

• Port Size
• 150 mm (overall diameter)

• Power Supply
• Not required (manual operation)

• Resolution
• Up to 1%

• Response Time
• Manual, instantaneous upon loading

• Specimen Size
• Aggregate passing 12.5 mm and retained on 10 mm IS Sieve

• Temperature
• Ambient

• Test Range
• Aggregate crushing value between 0-100%

• Test Speed
• Uniform manual load application

• Test Stroke
• Variable, determined by plunger stroke

• Test Width
• 130 mm (internal diameter of cylinder)

• Usage
• Testing aggregate crushing value for construction materials

• Equipment Type
• Aggregate Impact Testing Apparatus

• Accuracy
• As per IS Code Specification

• Application
• Impact value determination of aggregate

• Automation Grade
• Manual

• Capacity
• 13.75 kg (Approx Hammer Weight)

• Control Mode
• Manual

• Features
• Cast iron base, Manual release mechanism, Guide columns, Cylindrical cup, Tamping rod, Measuring cylinder

• Hardness
• High-grade cast iron construction

• Humidity
• Ambient

• Interface Type
• Manual Interface

• Machine Weight
• Approx 45 kg

• Max Height
• Approx 38 cm (Height of Hammer Drop)

• Measuring Range
• 10 mm to 12.5 mm aggregates (IS 2386 Part 4:1963)

• Mounting Type
• Floor/Table Mount

• Number of Specimens
• Single Specimen per Test

• Operating Voltage
• N/A (Manual)

• Power Supply
• Not Required (Manual Operation)

• Response Time
• Immediate

• Specimen Size
• 10 mm to 12.5 mm aggregates

• Temperature
• Ambient

• Test Range
• Standard Aggregate Impact Values (AIV)

• Test Speed
• Manually Controlled (Swift Release Mechanism)

• Test Stroke
• 380 mm (Height of Drop Hammer)

• Test Width
• 12 cm (Approx) - Base Plate

• Usage
• Civil Engineering Laboratory, Aggregate Testing

• Equipment Type
• Manually Operated Riffle Sample Divider

• Accuracy
• Consistent sample splitting due to precise slot sizing

• Application
• Sampling, dividing, and reducing bulk powdered and granular materials

• Automation Grade
• Manual

• Capacity
• Approx. 2-3 kg per operation

• Control Mode
• Manual

• Features
• Corrosion resistant body, portable, sturdy construction

• Hardness
• Mild Steel, Powder Coated

• Interface Type
• Manual chute operation

• Machine Weight
• Approx. 15 kg

• Max Height
• Approx. 300 mm

• Measuring Range
• 25 mm sample opening

• Mounting Type
• Table top

• Number of Specimens
• Multiple, based on number of slots

• Port Size
• 25 mm (each slot width)

• Power Supply
• Not Required (Manual)

• Response Time
• Instantaneous split on pour

• Specimen Size
• Suitable for particles up to 25 mm

• Temperature
• Room Temperature

• Test Range
• Sample division for dry granular material

• Test Speed
• Manual operation

• Test Width
• 250 mm (approx.)

• Usage
• Material testing laboratories, mining, aggregate, and soil sample preparation

• Equipment Type
• Loss Angeles Abrasion Testing Machine

• Accuracy
• 1%

• Application
• Determination of aggregate abrasion and impact resistance

• Automation Grade
• Semi-Automatic

• Capacity
• 12-15 kg per test

• Control Mode
• Digital Timer with automatic shut-off

• Display Type
• Digital Timer/Counter

• Features
• Heavy steel construction, replaceable drum, counter mechanism, dustproof cover, operation safety lock

• Frequency
• 50 Hz

• Hardness
• Drum shell minimum 40 HRC

• Humidity
• 10-90% RH (operating environment)

• Interface Type
• Panel interface

• Machine Weight
• Approximately 200 kg

• Max Height
• 1050 mm

• Measuring Range
• Aggregate abrasion loss 0-60%

• Mounting Type
• Floor Mounted

• Number of Specimens
• 1 per test

• Operating Voltage
• 230 V Single Phase

• Port Size
• 50 mm (sample inlet diameter)

• Power Supply
• 230 V AC, 50 Hz

• Resolution
• 0.1% loss

• Response Time
• Immediate digital reading

• Specimen Size
• 40 mm to 70 mm aggregates

• Temperature
• 10-50 C (operating environment)

• Test Range
• Upto 5000 g sample mass

• Test Speed
• 30-33 rpm

• Test Stroke
• Variable, up to 10000 revolutions

• Test Width
• 500 mm (drum length)

• Usage
• Laboratory aggregate abrasion testing

• Equipment Type
• Aggregate Test Apparatus

• Accuracy
• As per IS Standard

• Application
• Determination of Elongation Index of coarse aggregates

• Automation Grade
• Manual

• Capacity
• Sized for laboratory testing of aggregate

• Control Mode
• Manual

• Features
• Supplied with handle, elongated slots, and base

• Hardness
• High-quality metal construction

• Humidity
• Room Condition

• Machine Weight
• Approx. 5 kg

• Max Height
• Conforms to aggregate size (up to 63 mm)

• Measuring Range
• For different size ranges of aggregates

• Mounting Type
• Bench top/Self-standing

• Number of Specimens
• Single test at a time

• Power Supply
• Not Required (Manual Apparatus)

• Resolution
• Fine precision steel gauge

• Response Time
• Immediate (manual measurement)

• Specimen Size
• Conforms to IS: 2386 (Part I)

• Temperature
• Ambient

• Test Range
• For aggregate particles size 63 mm to 6.3 mm

• Test Speed
• Manual operation

• Test Width
• Gauge slots as per IS: 2386 (Part I)

• Usage
• Laboratory Testing of Aggregate Elongation Index

• Equipment Type
• Metal Camber Board

• Accuracy
• 0.05 mm

• Application
• Camber measurement of metallic specimens

• Automation Grade
• Semi-automatic

• Capacity
• 1000 N

• Control Mode
• Manual or Automatic

• Display Type
• Digital LCD

• Features
• Durable metallic frame, precision measurement, compact structure

• Frequency
• 50 Hz

• Gas Pressure
• 0.6 - 0.8 MPa

• Hardness
• Frame: HRC 45-52

• Humidity
• 20% to 90% RH

• Interface Type
• RS232/USB

• Machine Weight
• Approx. 70 kg

• Max Height
• 400 mm

• Measuring Range
• 0 - 20 mm

• Mounting Type
• Bench Top

• Number of Specimens
• 1 at a time

• Operating Voltage
• 220V AC

• Port Size
• Standard 1/4 inch

• Power Supply
• AC 220V 10%, 50Hz

• Resolution
• 0.01 mm

• Response Time
• <1s

• Specimen Size
• 120 mm 150 mm

• Temperature
• 10C to 40C

• Test Range
• 20 mm camber

• Test Speed
• Variable, up to 200 mm/min

• Test Stroke
• Max 250 mm

• Test Width
• 150 mm

• Usage
• Laboratory/Industrial Camber Testing

• Equipment Type
• Ring and Ball Apparatus

• Accuracy
• 0.5C (with standard thermometer)

• Application
• Determination of softening point of bituminous materials

• Automation Grade
• Manual

• Control Mode
• Manual

• Display Type
• Glass thermometer (analogue); digital optional

• Features
• Corrosion-resistant brass rings, steel balls, complete with beaker, ball guides, support frame, and thermometer holder

• Humidity
• Ambient

• Machine Weight
• Approx. 2.5 kg

• Max Height
• Approx. 200 mm (assembled)

• Measuring Range
• Up to 110C

• Mounting Type
• Tabletop

• Number of Specimens
• Two at a time

• Operating Voltage
• N/A (Manual)

• Power Supply
• Not required (manual)

• Resolution
• 0.1C (with mercury or digital thermometer)

• Response Time
• Immediate (depends on thermometer)

• Specimen Size
• Standard bitumen ring (approx. 17.5 mm inside diameter, 6.4 mm depth)

• Temperature
• Room temperature to 110C (with thermometer)

• Test Range
• Up to 110C

• Test Speed
• Manual operation

• Test Width
• Standard ring diameter: 17.5 mm (inside)

• Usage
• Laboratory

• Equipment Type
• Proving Ring

• Accuracy
• 0.5% of full scale

• Application
• Force measurement, calibration of testing machines

• Automation Grade
• Manual

• Capacity
• 1 kN, 2 kN, 5 kN, 10 kN, 25 kN, 50 kN (as per ring type)

• Control Mode
• Manual

• Display Type
• Analog (Dial Gauge)

• Features
• High accuracy, sturdy construction, portable, traceable calibration

• Hardness
• 50-60 HRC (Steel construction)

• Humidity
• 0-95% RH (Non-condensing)

• Interface Type
• Mechanical

• Machine Weight
• 2.5 kg

• Max Height
• 210 mm

• Measuring Range
• According to capacity; e.g. 0-10 kN

• Mounting Type
• Vertical or horizontal

• Number of Specimens
• 1

• Resolution
• 0.001 kN (varies by dial gauge used)

• Response Time
• Instantaneous

• Specimen Size
• Compatible with proving ring loading plunger

• Temperature
• 0C to 50C

• Test Range
• 10 N to 50 kN depending on model

• Usage
• Force measurement, proving material testing loads

• Equipment Type
• Concrete Vibrator Needle

• Application
• Concrete compaction in construction projects

• Automation Grade
• Manual

• Control Mode
• Manual

• Features
• Abrasion-resistant hardened steel head, flexible shaft, rapid concrete settlement, corrosion resistant

• Frequency
• 12000-16000 Vibrations per minute (vpm)

• Hardness
• Steel tube-HRc 50-65 (head)

• Humidity
• 0-100% RH (operating environment)

• Interface Type
• Mechanical connection to vibration motor

• Machine Weight
• 2.8 - 4.5 kg (depending on length)

• Mounting Type
• Shaft coupling (to electric or petrol vibrator motors)

• Operating Voltage
• 220V / 110V (depends on motor used)

• Power Supply
• Electric (compatible with standard concrete vibrator motors)

• Response Time
• Immediate

• Temperature
• -10C to 50C (operating range)

• Usage
• To remove air bubbles and ensure proper compaction of concrete

• Equipment Type
• Pan Mixer Machine

• Accuracy
• High uniform mixing

• Application
• Mixing concrete, mortar, and other construction materials

• Automation Grade
• Semi-Automatic

• Capacity
• 100 kg per batch

• Control Mode
• Manual/Automatic

• Features
• Heavy-duty structure, low maintenance, replaceable liners, easy unloading, rapid mixing

• Frequency
• 50 Hz

• Hardness
• MS Drum with 10 mm bottom plate and 8 mm side plate

• Humidity
• Up to 90% RH

• Interface Type
• Panel/Lever Switch

• Machine Weight
• 420 kg

• Max Height
• 1200 mm

• Mounting Type
• Base Mounted

• Operating Voltage
• 415 V

• Power Supply
• 3 Phase, 415 V, 50 Hz

• Response Time
• Immediate

• Temperature
• 5C to 50C

• Test Range
• Suitable for 40 to 100 kg Batch Mix

• Test Speed
• 24-28 rpm

• Test Width
• 900 mm

• Usage
• Construction sites, laboratory, industrial

• Equipment Type
• Extensometer

• Accuracy
• 0.01 mm

• Application
• Measurement of lateral extension of concrete specimens during compression testing

• Automation Grade
• Manual

• Capacity
• Applicable for standard concrete cylinders

• Control Mode
• Manual

• Display Type
• Dial gauge

• Features
• Rugged design, easy installation, precise dial gauge, spring loading

• Hardness
• High-grade steel make

• Humidity
• 0-90% RH (non-condensing, recommended)

• Interface Type
• Mechanical

• Machine Weight
• Approx. 1.5 kg

• Max Height
• Fits 150 mm diameter x 300 mm high cylinder

• Measuring Range
• 0-12 mm

• Mounting Type
• Clamp type (with knife edges and springs)

• Number of Specimens
• Single specimen at a time

• Power Supply
• Not required (mechanical/manual)

• Resolution
• 0.01 mm

• Response Time
• Instantaneous/manual

• Specimen Size
• 150 mm diameter x 300 mm length (cylindrical concrete specimen)

• Temperature
• 5-50C (operating)

• Test Range
• 0-12 mm (lateral extension)

• Test Speed
• Manual/As per testing process

• Test Stroke
• 12 mm maximum

• Test Width
• Up to 150 mm specimen

• Usage
• Material testing laboratory, civil engineering, concrete compression test

• Equipment Type
• Laboratory Consistency Testing Apparatus

• Accuracy
• 1 second (for time measurement)

• Application
• Measurement of workability/consistency of fresh concrete

• Automation Grade
• Manual

• Capacity
• 8 litres (Vee container)

• Control Mode
• Manual operation

• Display Type
• Analog timer/dial

• Features
• Tough iron body, vibration table, acrylic disc, graduated scale

• Frequency
• 50 Hz

• Hardness
• Mild Steel Construction

• Humidity
• Up to 95% RH (non-condensing)

• Interface Type
• Manual

• Machine Weight
• Approximately 30 kg

• Max Height
• Approx. 550 mm

• Measuring Range
• Consistency between very dry and stiff concrete mixes

• Mounting Type
• Benchtop

• Number of Specimens
• Single specimen testing at a time

• Operating Voltage
• 230V AC

• Power Supply
• 230 V AC, 50 Hz, Single Phase

• Resolution
• 1 second

• Response Time
• Immediate (mechanical movement)

• Specimen Size
• Capacity up to 8 litres concrete

• Temperature
• 10C to 50C

• Test Range
• 0 to 60 seconds for consistency

• Test Speed
• Standard (as per IS 1199: 1959)

• Test Stroke
• Adjustable, with graduated scale

• Test Width
• Vee container width 250 mm

• Usage
• Determination of workability of fresh concrete by Vee Bee method

• Equipment Type
• Vibrating Hammer

• Accuracy
• 1%

• Application
• Compaction of concrete cylinders and cubes

• Automation Grade
• Manual

• Capacity
• Standard- as per IS:1199

• Control Mode
• Manual

• Display Type
• Analog/Dial

• Features
• Rugged construction, easy to use, consistent performance

• Frequency
• 50 Hz

• Hardness
• Industrial grade steel

• Humidity
• 10-90% RH

• Interface Type
• Plug-in power

• Machine Weight
• Approx. 36 kg

• Max Height
• Approx. 300 mm (for standard mold)

• Measuring Range
• Standard for IS Codes

• Mounting Type
• Tabletop

• Number of Specimens
• 1 at a time

• Operating Voltage
• 230V AC

• Port Size
• Standard fitting

• Power Supply
• 230V AC, 50Hz

• Resolution
• 0.1 mm

• Response Time
• Instantaneous

• Specimen Size
• Cylinder: 150 mm dia. x 300 mm height

• Temperature
• 5C - 45C

• Test Range
• Customizable

• Test Speed
• 1800-3600 rpm

• Test Stroke
• 10-13 mm

• Test Width
• 150 mm

• Usage
• Laboratory

• Equipment Type
• GI Sheet Slump Test Apparatus

• Accuracy
• 1 mm

• Application
• Determining the workability (slump) of fresh concrete

• Automation Grade
• Manual

• Capacity
• Single test capacity

• Control Mode
• Manual

• Display Type
• Manual scale/mechanical reading

• Features
• Corrosion resistant GI sheet, base plate, cone, tamping rod, easy to clean

• Hardness
• Cone and base manufactured with hardened GI sheet

• Humidity
• Ambient

• Machine Weight
• Approx. 5 kg

• Max Height
• 200 mm (slump cone)

• Measuring Range
• 0-250 mm (slump height difference)

• Mounting Type
• Table Top/Bench Mount

• Number of Specimens
• 1 per test

• Power Supply
• Not required for core test

• Resolution
• 1 mm

• Response Time
• Immediate/manual

• Specimen Size
• 100 mm (base diameter) x 200 mm (height) x 200 mm (top diameter)

• Temperature
• Ambient

• Test Range
• Standard slump value measurement range for fresh concrete

• Test Speed
• Manual operation

• Usage
• For laboratory and field testing of concrete slump